[ USB CABLES ] [ USB 2.0 ] USB2ISA-R ROHS USB2ISA-RA USB2ISA-SLOT USB2ISA-X3 USB2ISA-X7 USB2PCMCIA [ SOFTWARE ] [ ENCLOSURES ] [ POWER SUPPLIES ] [ ISA-PC104 ] [ USB 1.1 ] [ UPCOMING PRODUCTS ] [ SSI2 ] FAQS News Company Strategy Warranty/Refund Policy Mail List SiteMap Contact Us Knowledge Base Technical Support Demo Software Installation Software License Agreement

[Click images to enlarge] The ARS Technologies power supply module is designed for the USB2ISA USB2ISA-RA USB2ISA-SLOT USB2ISA-X3 USB2ISA-X7 Dimensions: 0.5 X 0.25 X 0.3 inches. The power supply module provides additional voltages as follows: -5V/100mA +12V/45mA -12V/45mA for the ISA card(s). The power supply module is powered through USB cable, so there is no need of external cables or an external power supply when using the isa-pwr. To find do you need the Power Supply Module, please read the DO I NEED A POWER SUPPLY MODULE article. POWER SUPPLY MODULE INSTALLING THE POWER SUPPLY MODULE (ISA-PWR) [Click on images to enlarge] How To Install The POWER SUPPLY MODULE The POWER SUPPLY MODULE (ISA-PWR) can be installed on the USB2ISA USB2ISA-RA USB2ISA-SLOT USB2ISA-X3 or USB2ISA-X7 Installing the POWER SUPPLY MODULE IS SIMPLE. Step 1 Place the POWER SUPPLY MODULE on a flat surface so that the five silver pins of the POWER SUPPLY MODULE are closest to the surface. Step 2 Pick up the isa-pwr and insert the five silver pins into the 6-pin connector that is next to the ISA slot on the USA2ISA, USB2ISA-X3, USB2ISA-X7, OR USB2ISA-SLOT card. NOTE 1: On of the connectors in the 6-pin connector will remain empty because the isa-pwr only has five pins. Look at the images below for a visual demonstration of installing the isa-pwr (POWER SUPPLY MODULE) Theses instructions are the same for installing the isa-pwr on the USB2ISA, USB2ISA-RA, USB2ISA-X3, USB2ISA-X7 and USB2ISA-SLOT. NOTE 2: When applying the isa-pwr, please make sure to change your jumper settings as explained in the User’s Guide. The USB2ISA and USB2ISA-RA are shown below. The POWER SUPPLY MODULE is placed as it would be before the isa-pwr is attached to the USB2ISA or USB2ISA-RA. The USB2ISA and USB2ISA-RA before the ISA-PWR is attached. The isa-pwr is aligned with the 6-pin connector on the USB2ISA and USB2ISA-RA. Installing the ISA-PWR on the USB2ISA Step 1: Position the isa-pwr so that it is aligned with the 6-pin header on the USB2ISA. The 6-pin header is next to the ISA slot on the USB2ISA. Step 2: Place the isa-pwr into the 6-pin connector and gently press down. Installing the ISA-PWR on the USB2ISA-RA >Step 1: Position the isa-pwr so that it is aligned with the 6-pin header on the USB2ISA. The 6-pin header is next to the ISA slot on the USB2ISA-RA. >Step 2: Place the isa-pwr into the 6-pin connector and gently press down.

Copyright © 2008 ARS Technologies, Inc All Rights Reserved Customer Login - Order Tracking - View Cart - Advanced Search - ARS Tech Product Update List - Warranty/Refund Policy - Privacy Policy - Terms of Use - Contact Us - SiteMap